Cisco 7975G Software Manual page 117

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Programmable line keys
(PLK)
Protected calling
Quality Reporting Tool
(QRT)
Redial
Ring setting
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Description
The administrator can assign features to line buttons.
Softkeys normally control these features; for example,
New Call, Call Back, End Call, and Forward All. When the
administrator configures these features on the line buttons,
they always remain visible, so users can have a "hard" New
Call key.
Provides a secure (encrypted) connection between two
phones. A security tone is played at the beginning of the
call to indicate that both phones are protected. Some
features, such as conference calling, shared lines,
Extension Mobility, and Join Across Lines are not
available when protected calling is configured. Protected
calls are not authenticated.
Allows users to use the QRT softkey on a phone to submit
information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.
Allows users to call the most recently dialed phone number
by pressing a softkey.
Identifies ring type used for a line when a phone has
another active call.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Administration Guide,
"Phone Button Template
Configuration" chapter
Cisco Unified Communications
•
Manager Administration Guide,
"Modifying Phone Button
Templates"
For more information about security,
see the "Overview of Supported
Security Features" section on
page 1-10.
For additional information, refer to
Cisco Unified Communications
Manager Security Guide.
For more information refer to:
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Quality Report Tool"
chapter.
Requires no configuration.
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Directory Number
Configuration" chapter.
• "Creating Custom Phone Rings"
section on page 6-2.
5-13