Adjusting With The Arrow Keys - Barco R9010300 Owner's Manual

3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select ScenergiX.
5. Press → to select the ScenergiX item.
6. Use ↑ or ↓ to select Border.
7. Press ENTER to select.
A dialog box will be displayed. The actual scenergix border will be displayed.
8. Use ↑ or ↓ to select the desired adjustment.
Image 13-22

Adjusting with the arrow keys.

1. When on an adjustment, use the → or ← key to move the border line to the desired position.
The border line will move in the desired direction and the light output in the overlap area will be adapted to. (image 13-23)
Set first the width of the first projector and repeat for the second one. (image 13-24, image 13-25)
Image 13-23
Width selections
R5976817 RLM H5 17/01/2005
13. Display Setup
129