Take Screenshot - Barco R9010300 Owner's Manual

Image 13-3
To enable the menus and dialog boxes again, press the TEXT button on the RCU.

13.4 Take screenshot

What can be done ?
A screen-shot can be taken from the active projected image. This screen-shot is then saved in a 4 MB RAM and can be used as
background (logo).
Each new screenshot erases the previous one, therefore a warning message is displayed asking the user to confirm.
How to take a screenshot ?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-4)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Take screenshot.
5. Press ENTER.
A dialog box is displayed. (image 13-5)
6. Press yes to confirm.
A text box shows the evolution of the operation. (image 13-6, image 13-7)
Image 13-4
R5976817 RLM H5 17/01/2005
13. Display Setup
121