Lens Installation; Cleaning The Lens - Barco R9010300 Owner's Manual

Projection system rlm h5
Table of Contents

Advertisement

2. Installation Guidelines
Wide
TLD HB (2.8 -
5)
Tele
TLD HB (5 - 8)
Wide
Tele
2.3.3

Lens installation

The default lens is standard mounted on the projector when it arrives on your location.
How to replace with another lens?
Follow the next procedure:
1. Move the handle (A) of the lens anchor system to the left and take out the lens.
2. Take the new lens assembly out of its packing material and remove the lens caps on both sides.
3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B). (image 2-3)
Caution:
On a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
4. Move the handle (A) of the lens anchor system to the right (front view, table mount) to lock the lens.
Image 2-3
2.3.4

Cleaning the lens

To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have de-
veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from
the lens by blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee
TM
cloth (delivered together with the lens kit). Order number : R379058.
How to clean the lens ?
Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
16
Metric Formulas (meter)
PD = 2.83 x SW - 0.14
PD = 5.15 x SW - 0.35
PD = 4.94 x SW + 0.01
PD = 8.23 x SW - 0.26
cloth.
TM
Inch formulas (inch)
PD = 2.83 x SW - 5.51
PD = 5.15 x SW + 13.78
PD = 4.94 x SW + 0.39
PD = 8.23 x SW - 10.24
R5976817 RLM H5 17/01/2005

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rlm h5

Table of Contents