Signal Menu; Overview Of The Signal Menu; Switching Mode - Barco R9010300 Owner's Manual

10. SIGNAL MENU

Overview
•

Overview of the Signal menu

•

Switching mode

• Output Frame rate
• Background
10.1 Overview of the Signal menu
Overview
Switching mode
- Seamless
- Box in
- Box out
- Shift in left
- Shift in right
- Shift in top
- Shift in bottom
- Vertical curtain open
- Vertical curtain close
- Horizontal curtain open
- Horizontal curtain close
- Fade in out
- Random
Output frame rate
- Synchronous
- 50 Hz
- 60 HZ
Background
- Logo
- Blue
- Black
10.2 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode. Beside
Seamless switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Tool bar.
2. Press → to select the Signal item. (image 10-1)
3. Press ↓ to pull down the Signal menu.
4. Use ↑ or ↓ to select Switching mode.
5. Press → to pull down the menu.
6. Use ↑ or ↓ to select the desired switching mode.
7. Press ENTER.
A white bullet shows the active effect.
The next source switching will be done using the selected effect.
R5976817 RLM H5 17/01/2005
10. Signal menu
99