Automatic Load - Barco R9010300 Owner's Manual

12. Image Files Menu
Image 12-19
Delete custom file
Video625.c02
All files
Active files:
Video625.c01
Image 12-20

12.10Automatic load

What can be done ?
When automatic load is 'off', the projector will not load another file when the source is interrupted or when the image is suddenly
changed to another file format. The new image will be displayed with the same settings as the previous source.
When automatic load is 'on', the projector will follow the new source settings.
How to set up ?
1. Press MENU to activate the menu bar.
2. Press → to select the Image files item. (image 12-21)
3. Press ↓ to pull down the Image files menu.
4. Use ↑ or ↓ to select Automatic load.
5. Press → to display the choices.
6. Use ↑ or ↓ to select desired choice.
On The projector will switch the file when the source settings change.
Off The projector stays on its active file even when the settings of the source change.
116 R5976817 RLM H5 17/01/2005