Source Selection; Source Selection Overview; The Use Of Icons - Barco R9010300 Owner's Manual

6. SOURCE SELECTION

Overview
•

Source Selection overview

•

The use of icons

• Source selection
• Selecting a data source on the 5-cable input
• Composite Video
• S-Video selection
• The Video Selector
6.1 Source Selection overview
Source selection overview
• Data on BNC's
• Component Video
• RG(s)B Video
• PC
Composite Video
- Video
- Video VS
- Video R
- Video G
- Video B
- Video Y
- Video C
S-Video
- S-Video 1
- S-Video 2
- S-Video 3
• DVI
• SDI or HDSDI
• Logo
• Video selector...
6.2 The use of icons
Overview
A Barco logo in front of a menu item indicates the presence of a signal at the input.
The digit icon in front of an item, indicates the shortcut key on the RCU.
6.3 Source selection
Selecting a source
The Source selection menu allows to select one of the different sources. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
How to select a source ?
1. Press MENU to activate the menu bar.
2. Press ↓ to pull down the Source Selection menu.
3. Use ↑ or ↓ to select one of the different sources (Press → to pull down if the item has a submenu).
R5976817 RLM H5 17/01/2005
6. Source selection
51