Barco R9010300 Owner's Manual page 76

8. Image Menu
Show native resolution is greyed out for video signals.
DMD
Digital Micromirror Device
What can be done
The aim here is to always show the resolution of the source independently of the resolution of the DMD panels.
Image 8-15
When the show native resolution function is in the ON position, the projector handles the source as follows:
Source
Name Ratio
XGA 4:3
SXGA 5:4
4:3
SXGA+
UXGA 4:3
720p 16:9
When the Full Screen Representation function is in the ON position, it forces to use the complete native res-
olution of the DMD panels, except when the Show native resolution function is switched ON.
How to enable the "Show native resolution" function?
1. Press MENU to activate the menu bar.
2. Press → to select the Image item.
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select Show native resolution. (image 8-16)
72
Projected image
Resolution Ratio
1024x768 4:3
1280x1024 5:4
1400x1050 4:3
1600x1200 4:3
1280x720 16:9
Resolution
1024x768
1280x1024
1400x1050
1600x1200
1280x720
Up and down, a few lines
missing. Image scroll
possible.
Left and right black bars.
part of the image displayed,
image scroll possible
part of the image displayed,
image scroll possible
part of the image displayed,
image scroll possible
normal image projected
R5976817 RLM H5 17/01/2005