Startup Screen; Textbox - Barco R9010300 Owner's Manual

13. Display Setup

13.2 Startup screen

What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
This startup screen can be disabled.
How to enable/disable the Startup screen?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-2)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Startup screen.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select On or Off.
On Start up screen will be displayed.
Off No start up screen will be displayed during start up.
7. Press ENTER to confirm.
Image 13-2

13.3 TextBox

What can be done ?
All menus, dialog boxes and text boxes can be disabled by putting the text box function in the off position.
How to enable/disable the Textbox ?
1. Press MENU to activate the menu bar.
2. Press → to select the Display setup item. (image 13-3)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select Textbox.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to enable/disable the textbox.
7. Press ENTER.
120 R5976817 RLM H5 17/01/2005