Battery Insertion In The Remote Control - Barco CINEVERSUM 60 Installation Manual

2. Installation Guidelines
Vertical lens shift ranges
SH
A
SH
B
Image 2-4
Vertical lens shift
The distance between the middle of the projected image and the perpendicular line from the projector.
For CineVERSUM 60 :
• A = 0.275 x SH
• B = 0.86 x SH
For CineVERSUM 70 :
• A = 0.24 x SH
• B = 0.625 x SH

2.7 Battery Insertion in the Remote Control

Where to find the batteries
The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.
How to install the batteries
1. Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (image 2-5)
2. Slide the cover forwards to remove. (image 2-6)
3. Push the battery body towards the spring and lift it up to remove. (image 2-7)
4. Insert two AA size batteries, making sure the polarities match the + and – marks inside the battery compartment (image 2-7).
5. Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place
(image 2-6).
12 R5976763 CINEVERSUM 60/70 22042004