Table of Contents
Advertisement
How to activate an add-in ?
1
Push the cursor key é or ê to highlight 'Add-Ins' (menu 1).
The Add-Ins menu will be displayed (menu 2)
2
Push the cursor key é or ê to highlight add-in.
3
Press ENTER to activate.
The Install Add-Ins menu will be displayed (menu 3).
4
Enter your personel key.
The key exists out of 16 alfanumeric characters.
5
To reprogram the key, use the cursor key é , ê,ç
When the entered key is correct, the indication 'Software : not activated' will change in 'activated'.
6
Press ENTER to confirm.
SERVICE
BARCO LOGO
RESET INPUT BALANCE
ADD-INS
I2C DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
I2C diagnosis.
What can be seen ?
Gives an overview of the correct working of the I²C controlled IC's.
How to start the I2C diagnosis ?
1
Push the cursor key é or ê to highlight 'I2C diagnosis' (menu 1).
2
Press ENTER to display.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
ADD-INS
I2C DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976072 BARCOELM R12 05052000
Downloaded from ProjectorsManual.com Manuals
or è or the numeric keys for the digits.
ADD-INS
LIGHT SENSOR [INACTIVE]
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
I2C DIAGNOSIS
D C A
DECODER
12H # # #
MOTOR DRIVER
1AH # # #
LIGHT SENSOR
1CH # # #
LAMP DRIVER
20H # # #
LAMP DRIVER
22H # # #
POWER SUPPLY
30H # # #
INPUT SELECTOR
46H # # #
PMP INPUT SELECTOR
4AH # # #
INPUT SELECTOR
7EH # # #
LAMP MODULE
A0H # # #
Scroll with é or ê
<EXIT> to return.
menu 1
INSTALL ADD-INS
LIGHT SENSOR
Key : xxxxxxxxxxxxxxxx
Hardware : OK
Software : Not activated
Select with é or ê
Reprogram with é , ê , ç or è
<ENTER> to confirm
<EXIT> to return.
menu 3
Service Mode
9-9
Advertisement
Table of Contents
