Table of Contents
Advertisement
Control - Projector
6.1 Macros control
6.1.1 About macro control
Location & access
Menu: Control > Projector > Macros
Level: Administrator, Service technician, Show manager
Overview
All macros available in the projector are listed here. Use this page to activate a macro.
Image 6–1
Each macro displayed here has a title (reference 1). If a macro is associated with a preset button (projector
keypad), the preset number (reference 2) is specified on the macro. For more details concerning link to preset
buttons, please refer to chapter "Linking a macro to preset button", page 87.
Click Execute (reference 4) allows to activate the macro. During its execution, the status of the macro
(reference 3) turns to BUSY. When the macro is completed, the status of the macro (reference 3) turns to
EXECUTED.
6.1.2 Activating a macro using the control menu
What is possible
A macro can be activated via one of the preset buttons (touch display located on Input & Communication side
of the projector) or directly via a click on Execute button (see following procedure).
How to activate
1.
While in Control > Projector > Macro, locate the macro you want to activate then click Execute (reference
1).
Image 6–2
62
R5910032 /00
Freya
1
2
4
3
2
1
Advertisement
Table of Contents
