Basic Queue-Based Printing Over Ip - Axis 5600+ User Manual

Section 5: Setting Up - NetWare
64

Basic Queue-based printing over IP

Installing the
AXIS 5600+
9. Select an appropriate NetWare Print Server name, that will be
associated with the AXIS 5600+ print server, by using the
Browse... button.
You cannot type or edit the name manually.
Notes:
Make sure that you have PSERVER.NLM running if you selected
Remote Printer Mode in step 8.
10. If you want to define a remote printer number slot manually,
check the Manual box and type the desired number in the box.
11. Click the OK button to return to the Network Environments
window.
Axis print servers with software version 6.0 or later allow users to print
in a Pure IP environment using traditional queue-based printing
(which usually uses the IPX transport protocol). Note that only NDS
queue-based printing is supported.
In the NetWare Pure IP environment, you must use the NetWare
Administrator to create the printer, print server and queue objects.
Follow the instructions below to install the AXIS 5600+ in the
NetWare Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS
5600+ Web interface.
2. Click your way through the Wizard until reaching the NetWare
page.
AXIS 5600+ User's Manual