Step 1—Preparing the workstation
Introduction
This section describes how to prepare your workstation for disassembly.
Procedure: preparing the workstation for disassembly
To prepare the workstation for component installation:
Step
1
2
3
References
Your workstation documentation includes instructions for disassembling and preparing the workstation
for installation.
For product-specific information, see the Service and Technical Reference Guide for your HP
workstation at http://www.hp.com/support/workstation_manuals.
ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Action
Power down the workstation.
Disconnect power from the workstation.
Open the access cover.
Step 1—Preparing the workstation
3