Pip Select; Pip Position; Pip - Barco RLM-W14 User Manual

9.Layout

9.4 PIP Select

Use this function to select the source for the sub window.
You can choose from HDMI1, HDMI2, VGA, YUV1, RGBHV/YUV2.
PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an
image. The windows may be of the video or data type.

9.5 PIP Position

You can choose to display
the sub window in five different
location over the main picture
according to your preference.
Split L-R

9.5 PIP

If you wish to display PIP image, you can make the configuration here.By choosing "ON", you will see two windows on
the projected image; the larger one is the primary image and the smaller one is the sub image.By choosing "OFF", the PIP
function will be disabled and you will only see a single image window.
Refer to the following main and PIP source matrix for a valid main and PIP source selection when PIP is ON.
Pip/main source
availability
HDBaseT
HDMI
VGA
YUV1
RGBHV/YUV2
SDI/HDSDI/3G
Source availabe
50
Top Left
Bottom Left
Main select
HDBaseT HDMI VGA YUV1
-
-
-
-
- -
- -
-
source not availabe
Sub picture
SDI/
RGBHV/
HDSDI/
3D-DVI
YUV2
3G
-
-
-
-
- -
- -
-
-
Main picture
Top Right
Bottom Right
RLM W14 08/20/2014