Table of Contents
Advertisement
5. Click Browse (or Choose File in some browsers — the button near the top of the page) in the Upload New
Firmware section (not in the Configuration File section near the bottom) and navigate to the firmware upgrade
package. Click Open to select the file and click Upload in the Upload New Firmware section to apply the upgrade
package to the Vanguard router.
6. The Vanguard router displays the message "Uploading new firmware. Please wait..." as it uploads the firmware
upgrade which may take up to 15 minutes to complete. When it has finished uploading the upgrade, the Vanguard
displays a message that it has successfully installed the new firmware. It will display this message for
approximately one minute and then reboot automatically.
7. Wait for the Vanguard 3000 to reboot, then wait a full minute after it has rebooted, and then access the Vanguard
Web Interface again as in steps 2 and 3 of these instructions.
8. Select Firmware Update from the main navigation menu to navigate to the Firmware Update page.
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
| Page 125
Advertisement
Table of Contents
