Table of Contents
Advertisement
6.4
INSERTING WIRES INTO USER PORT CONNECTOR
1. Insert 2.5 mm insertion tool (CalAmp PN 250-5006-001) into the wire release slot. Do not twist the insertion tool.
2. Keeping the Insertion Tool in place, insert wire (28 AWG minimum, 18 AWG maximum) into the wire hole.
3. Remove Insertion Tool. Check wire connection.
| Page 100
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Advertisement
Table of Contents
