Table of Contents
Advertisement
APPENDIX B — MECHANICAL SPECIFICATIONS
Following figures show Vanguard 3000 standard and mobile models. Dimensions are shown for the unit alone and with
mounting brackets that allow them to be secured to any surface that can be drilled for this purpose. The drawings may
be used for layout reference, but it is advised that a physical comparison be made to the modem and bracket before
laying out and drilling mounting holes.
Table 24 Overall Dimensions, Vanguard 3000 standard and
mobile models
Dimension
Inches
Height
1.90
Width
6.00
Depth
4.50 ± 0.04
Depth
4.28
(Chassis only)
Side tapped mounting hole location detail — typical both
sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm) depth
2 holes for mounting both sides (4 holes total).
Centimeters
4,83
15,2
11,4 ± 0,1
10,9
Base tapped mounting hole location detail — bottom of chassis only.
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Figure 61 Vanguard 3000 standard and mobile overall dimensions
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for base mounting (bottom surface only).
| Page 103
Advertisement
Table of Contents
