Table of Contents
Advertisement
2
GETTING STARTED
2.1
PACKAGE CONTENTS
• Vanguard 3000 Modem
• Power Cable
• Mounting bracket
• Quick-Start Guide
• Installation Guide
• Information Card
2.2
DEVICE CONNECTIONS
1. (GSM users) Place the SIM card in the tray and insert it into the SIM/SVC slot as shown.
Figure 11 Place SIM card in SIM/SVC tray and insert tray in slot
2. Connect a cellular antenna (for Tx/Rx) to the female SMA connector labeled ANT on the front of the Vanguard
modem. Optionally, a second cellular antenna may be connected to the female SMA connector on the front panel
of the Vanguard modem for Rx diversity. The Rx diversity SMA connector is labeled AUX on fixed-location model
and labeled DIV on mobile models.
Note: Use of dual band cellular antennas is preferred.
3. Connect an Ethernet cable into the LAN 1 port and plug the other end into the network port of your PC.
4. Connect the DC power cable (or optional AC power adapter) to an applicable power source and plug the connector
into the modem power (PWR) connector. If using the fused power cable to connect to a DC supply (car battery),
use the diagram in
Figure 9 Wiring for ignition sense
the unit.
and accompanying pin-out information in
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Table 7
to connect
| Page 10
Advertisement
Table of Contents
