Table of Contents
Advertisement
Figure 37 Router — Static Routes
Static Routes
• Route Name
Sets the alphanumeric identifier of the static route in the Static Route table.
• Destination IP Address
Sets the IP address of the destination network.
• IP Subnet Mask
Sets the subnet mask of the destination network.
• Gateway
Sets PPP (this router's wireless Internet connection), PPTP (VPN), GRE Tunnel, WLAN (if applicable), or the local
network IP address for the gateway to the destination network.
• Gateway IP Address
This is only used if local IP address was selected for gateway. Enter the address of the local gateway.
• Metric
Enter a number from 1 to 20. The lower the metric value the higher the route priority.
Click Add to add the configured route to the Static Route Table.
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
| Page 53
Advertisement
Table of Contents
