Table of Contents
Advertisement
The following table describes WEP keys (ASCII and Hexadecimal; 64-bit and 128-bit) and gives examples.
Table 17 Descriptions of WEP keys and examples
WEP Key
64-bit
ASCII (Text)
5 character string (alphanumeric)
Example: Hello
Hex
10 Hexadecimal digits
Example: 1A2B3C4D5E
The following table describes TKIP keys.
Table 18 TPIK key description and example
TKIP Key
ASCII (Text)
The following table describes AES keys.
Table 19 AES key description and example
AES Key
ASCII (Text)
IP Settings
• IP Address
This sets the IP address for the WLAN side of the Vanguard.
• Subnet Mask
Sets the subnet mask for the WLAN side of the Vanguard unit.
Important: The WLAN subnet must not overlap with the LAN subnet defined on the LAN Settings tab of the LAN page.
DNS Masquerade
• DNS Auto
Selecting Enable will automatically set the preferred DNS Server to the WLAN IP address of the Vanguard unit.
Selecting Disable will allow the user to select the preferred and alternate DNS servers.
DHCP Server
• DHCP Server
Selecting "Enable" will configure this device to assign IP addresses to client devices taken from a pool specified by
the values entered in "Start IP Address" and "End IP Address". Selecting "Disable" will turn off the DHCP server
functionality for the Ethernet interface.
128-bit
13-character string (alphanumeric)
Example: LongHello1234
26 Hexadecimal digits
Example: 1A2B3C4D5E6F7788990A0B0C0D
Description
A string of 8 to 63 characters (alphanumeric)
Description
A string of 8 to 63 character (alphanumeric)
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Example
Hello123
Example
Hello123
| Page 48
Advertisement
Table of Contents
