CalAmp Vanguard 3000 User Manual page 122

Multicarrier 3g cellular broadband router
Hide thumbs Also See for Vanguard 3000:
Table of Contents

Advertisement

The Vanguard 3000 I/O agent uses and arbitrary IP port (default: 6263), configured via the Vanguard 3000 Web
interface.
The manager is able to send I/O requests and ACKs to the Vanguard 3000 via:
(a) TCP (connection is initiated by the Vanguard 3000).
(b) UDP (carrier-assigned WAN-side IP address, or LAN address).
The manager is able to send I/O responses, alarms, and indications to a manager IP address via:
(a) TCP (connection initiated by the Vanguard 3000).
(b) UDP
A single operator-configurable transport service (UDP or TCP) is available at any moment and is used for both
directions (manager → Vanguard 3000; manager ← Vanguard 3000).
Congestion Control
Messages are not queued up. If the Vanguard 3000 cannot deliver them (for example, configured for TCP but no socket
opened), they are silently dropped.
Congestion Control for established TCP-based connections follow and are limited to the built-in Vanguard 3000 TCP/IP
stack congestion control mechanisms.
PDU Format
Vanguard 3000 I/O requests and responses, alarms/indications, and ACKs use existing NME 0183 (v2.30) sentences.
Frame format is as described in the following section.
The "II" (Integrated Instrumentation) NMEA talker mnemonic is used.
Protocol Exchanges
Read Vanguard 3000 I/O value
(1) manager requests value (NMEA msg: ACK)
(2) Vanguard 3000 responds with requested data (NMEA msg: XDR)
[manager application] ---(1)--- request ----------> [Vanguard 3000]
[manager application] <-------- response ---(2)---- [Vanguard 3000]
Set the state of an output line
(1) manager requests operation (NMEA msg: ACK)
(2) Vanguard 3000 acknowledges that the command has been executed by returning
the updated output line state (NMEA msg: XDR)
[manager application] ---(1)--- request ----------> [Vanguard 3000]
[manager application] <-------- ack --------(2)---- [Vanguard 3000]
Receive and acknowledge an alarm sent by the Vanguard 3000
(1) Vanguard 3000 sends alarm (NMEA msg: ALR)
(2) manager acknowledges alarm (NMEA msg: ACK)
[manager application] <-------- alarm ------(1)---- [Vanguard 3000]
[manager application] ---(2)--- ack --------------> [Vanguard 3000]
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
| Page 116

Advertisement

Table of Contents
loading

Table of Contents