3.
4.
Video Loss Settings
You can specify a reaction to the case where no video is received from the camera.
1.
Figure 4-52
Motion Sensor Event Options
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From SYSTEM SETUP
Figure 4-53
Video Loss Event Options
EVENT, select VIDEO LOSS (see
System Setup | 99
Figure
4-53).
800-15802 - A - 12/2013