156 | Performance Series HREP2 DVR User Guide
Storage Settings
Device Information
You can check a list of internal/external storage devices connected to the DVR as well as the
recording time information of each device (see
S.M.A.R.T Status
You can check the S.M.A.R.T status for each of the internal and external devices (see
Figure
Sensor Settings
Alarm Output Settings
Specify the alarm output conditions (see
When finished, click APPLY to apply the changes.
www.honeywell.com/security
Figure 9-33
Web Viewer Device Information
9-34).
Figure 9-34
Web Viewer S.M.A.R.T. Setup
Note
What is S.M.A.R.T.?
This is a sort of HDD self-diagnosis tool that detects any error on the
system and alerts the user if an error occurs.
Figure
9-33).
Figure
9-35) with the work schedule (see
Figure
9-36).