Alarm Sensor Settings; Motion Sensor Settings - Honeywell HREP24 User Manual

158 | Performance Series HREP2 DVR User Guide

Alarm Sensor Settings

You can configure the settings of the alarm sensor and specify the operation of the sensor if an
event occurs (see
When finished, click APPLY to apply the changes.

Motion Sensor Settings

You can set an action to execute when a motion is detected (see
When finished, click APPLY to apply the changes.
www.honeywell.com/security
Figure 9-38 Web Viewer Display Event Notification
Figure 9-39 Web Viewer Email Event Notification
Figure 9-40).
Note For more information about each of the alarm sensor actions, refer to
Sensor Settings on page
Figure 9-40 Web Viewer Alarm Sensor Settings
97.
Alarm
Figure 9-41).