Printing; Capturing A Screen Image; Activex Settings - Honeywell HREP24 User Manual

140 | Performance Series HREP2 DVR User Guide

Printing

1.
2.

Capturing a Screen Image

1.
2.

ActiveX Settings

1.
2.
3.
4.
www.honeywell.com/security
Click again to stop saving. Click ActiveX Setting to display the context menu where
you can change the saving path.
Click .
The current screen will be printed with the printer connected to the PC.
Click .
The current screen of the selected channel will be saved to the path specified in the PC.
The default path is C:\SaveFolder.
Click ActiveX Setting to display the context menu where you can change the saving path.
Click (see Figure 9-7).
Figure 9-7 ActiveX Settings
When the setup screen appears, you can change the settings of the render type, audio,
capture and saving path as well as the video streaming.
Render: DirectDraw is recommended in order to enable the hardware acceleration.
If you want to change the saving path, click
The Windows Vista user cannot change the saving path.
Change the streaming settings according to the PC specification and network
environment.
Auto mode is recommended.
• Sync: If this option is set, the audio signal will be synchronized with the video signal.
However, you may encounter a delay due to buffering for the synchronization.
• Live CH: Set the audio signal to use in live monitoring mode.
• I Frame Only: Only the I frames (key frames) will be transferred.
(Save Folder) and specify a new path.