Buzzer Output
You can notify the user of the event using the buzzer (see
DURATION:
•
TRANSPARENT: Keep the buzzer out for as much time as the event lasts.
•
UNTIL KEY: Keep the buzzer out until a mouse or remote control button is pressed.
•
5 ~ 300 SEC: Keep the buzzer out for as long as specified.
Figure 4-48
Event Notification Buzzer Options
Display
If an event occurs, you can display the video screen or a popup message to notify the user of
the event (see
Figure
4-49).
VIDEO POPUP: Display the video channel that is synchronized with the event on a single split
screen. Set the DURATION of the single split screen:
•
TRANSPARENT: Keep the video popup displayed for as much time as the event
lasts.
•
UNTIL KEY: Keep the video popup displayed until a mouse or remote control button
is pressed.
•
5 ~ 300 SEC: Keep the video popup displayed for as long as specified.
Note
If multiple events occur at the same time, or if multiple event-related video
channels exist, the video popup will be displayed in the maximum split screen
mode rather than the single split screen mode.
System Setup | 95
Figure
4-48).
800-15802 - A - 12/2013