Table of Contents
Advertisement
34 | Performance Series HREP2 DVR User Guide
Connecting to an External Device
Connecting to the Monitor
This product supports 1080p 60 Hz HDMI monitors and regular monitors that support DVI and
VGA inputs. Use the switch on the product's rear panel to set it for an HDMI or VGA monitor.
Connect an HDMI cable to the port on the product's rear panel, or connect an HDMI-DVI
converter cable to connect to a DVI monitor. Or, use a VGA cable to connect the product with a
VGA monitor.
Once the product is set for NTSC or PAL, connect cameras of the corresponding video standard
for proper operations.
Setting the product to NTSC or PAL determines the unit's video input and output standards (see
Figure
CAUTION
supports 1920 x 1080 at 60Hz (HDMI, DVI, VGA).
Connecting Power
Plug the provided DC 12V adapter in the rear power port of the DVR. When done, attach the
Adapter cable retainer clip to the rear panel and insert the cable into the clip.
www.honeywell.com/security
2-1).
Figure 2-1
Setting NTSC or PAL Video Standards
Note
The monitor's displaying operates at 50 Hz if the product has been set to PAL
output and the connected monitor supports both 50 Hz and 60 Hz inputs. For the
NTSC setting, it works at 60 Hz.
Make sure to connect the product to a monitor that
Advertisement
Table of Contents
