1.
2.
3.
Control Device Settings
Configure the settings of the remote control and keyboard controller.
1.
2.
From SYSTEM SETUP
Figure 4-39
System Information Screen
Check the status of the current system.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Note
This function is provided for controlling individual DVR separately using a control
device or remote control, in case the site has multiple DVRs of the same model.
From SYSTEM SETUP
Use the
, and ENTER buttons on the remote control or use the mouse to set
,
,
,
the connection options for the control device.
SYSTEM, select SYSTEM INFORMATION (see
SYSTEM, select CONTROL DEVICE (see
System Setup | 87
Figure
4-39).
Figure
4-40).
800-15802 - A - 12/2013