Hard Drives
Compatible HDD Specifications
Table B-1
Hard Disk Drive Minimum Specifications
Specification
Maximum SATA Speed
Maximum Start-up Current
Maximum Average Operation
Power Consumption
Maximum R/W Latency
Note
Use 3.5" HDD disks.
Note
Using HDD devices other than recommended specifications may cause serious
problems.
Note
For further information of HDD specifications, refer to the applicable data sheet of
the HDD manufacturer.
Requirement
• SATA1 (1.5 G): Can be used
• SATA2 (3.0 G): Can be used
• SATA3 (6.0 G): Devices of backward compatibility
to SATA2 (3.0 G) can be used.
12 V, 2 A (or lower)
7.0 W (or lower)
Latency (Read: 13 ms / Write: 13 ms) or smaller
B
B
800-15802 - A - 12/2013