Table of Contents
Advertisement
•
OVERWRITE START EVENT: If you set the disk write mode to OVERWRITE, this event
occurs when the disk is full and the overwriting begins accordingly.
•
DISK FULL EVENT: If you set the disk write mode to ONCE, this event occurs when the
disk is full (100%).
•
DISK SPACE EXHAUSTED EVENT: Event that is triggered if the disk is almost full.
Click
to specify the threshold percentage of usage to trigger the event.
•
S.M.A.R.T EVENT: Occurs if the disk causes the S.M.A.R.T error.
•
NO DISK EVENT: Occurs if no disk is recognized after the booting due to a disk failure or
cable problem.
CAUTION
To detect the disk error, it is recommended not to
change the settings of the S.M.A.R.T event, no disk event and buzzer
output.
Record System Event Settings
PANIC RECORD START EVENT: Specify the action to perform when the panic recording
begins.
Figure 4-55
Record System Event Settings
System Event Settings
•
BOOTING EVENT: This event occurs when the DVR is booting.
•
LOGIN FAIL EVENT: This event occurs when the DVR fails to log in.
You can specify the times of clicking
•
FAN FAIL EVENT: This event occurs if the CPU cooling fan or unit's cooling fan does not
work at all.
to trigger the event.
System Setup | 101
800-15802 - A - 12/2013
Advertisement
Table of Contents
