Checking The Alarm Status; Checking The Network Status - Honeywell HREP24 User Manual

Checking the Alarm Status

You can check alarms and events from each camera and the system.
Click OK to close the window.

Checking the Network Status

This screen shows the connection status of cameras and network devices.
Click to display detailed information on current users and network connections.
Click OK to close the window.
Figure 3-10 Selecting an Audio Input Channel
Note A camera with a supported audio input should be selected. The DVR must be
connected to a speaker to play audio.
Figure 3-11 Checking the Alarm Status
Monitoring | 51
800-15802 - A - 12/2013