Connecting To A Pc From A Remote Network - Honeywell HREP24 User Manual

40 | Performance Series HREP2 DVR User Guide
CAUTION
you use the product for the first time after purchasing.

Connecting to a PC from a Remote Network

You can connect the DVR to a PC or mobile device in the same remote network and control or
manipulate it on the monitor of the PC or mobile device.
Remote PC
1.
CAUTION
servicing and development. (Do not connect devices to this port.)
2.
www.honeywell.com/security
For security purposes, change the password before
Figure 2-8 Remote Network Connection Overview
Smart Phone
Connect the WAN(UPLINK) port in the rear panel to the router.
The LAN (DOWN LINK) port is reserved and only for
Figure 2-9 Connecting Router for Remote Network Connection
Broadband
Router
ADSL Modem
Connect the WAN(UPLINK) port of the router directly to the fixed IP LAN cable, or connect
it to the ADSL modem (see
ADSL Modem
Local PC
Local PC
Figure 2-9).
Broadband
Router
Direct
Connection
Local PC