CAUTION
and logs.
3.
4.
S.M.A.R.T. Settings
You can check the S.M.A.R.T information of the disk and specify the check frequency.
1.
2.
Note that formatting the HDD will delete all video data
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Note
What is S.M.A.R.T information?
S.M.A.R.T (Self-Monitoring, Analysis and Report Technology) is to
detect a HDD that is likely to cause a problem in the future with a
warning message.
From SYSTEM SETUP
Figure 4-44
S.M.A.R.T. Setup Screen
Use the
, and ENTER buttons on the remote control or use the mouse to
,
,
,
check the S.M.A.R.T operation and specify the check interval.
•
S.M.A.R.T STATUS: Read the S.M.A.R.T information of the disk and check to display
if the current disk is in normal operation.
STORAGE, select S.M.A.R.T. SETUP (see
System Setup | 91
Figure
4-44).
800-15802 - A - 12/2013