Table of Contents
Advertisement
To make DVR utilize camera's PTZ functions, match the protocol and baud rate of connected
cameras and DVR (see
Tamper Setup
You can set to detect tampering attempts to interfere with monitoring operations by tampering
with installed cameras (see
Display Settings
OSD Settings
Configure the settings for the time, title, boundary, icon and language that will be displayed on
the screen (see
Make changes to each item of the OSD menu and click APPLY to apply the changes.
Figure
Figure
Note
For more information about how to set the Tamper settings, refer to
Detection on page
Figure 9-19
Web Viewer Tamper Setup
Figure
9-20).
9-18).
9-19).
62.
Web Viewer | 149
Tamper
800-15802 - A - 12/2013
Advertisement
Table of Contents
