Table of Contents
Advertisement
106 | Performance Series HREP2 DVR User Guide
Record Setup
Operation Mode Settings
In this menu you can set the recording options for Auto or Manual mode.
1.
2.
3.
4.
5.
Auto Configuration Settings
If you choose your preferred record mode, the DVR will recommend you the optimized settings
for the selected record mode (see
•
•
•
www.honeywell.com/security
From RECORDING menu, select OPERATION MODE.
Use the
,
,
, and
CONFIGURATION MODE to AUTO CONFIGURATION or MANUAL CONFIGURATION.
Set the recording options for each selected Record mode.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Figure 5-1
Operation Mode Auto Configuration
ALWAYS HIGH VIDEO QUALITY: Recording will proceed in the best quality regardless of
the event at all times.
As this option will always make recording in the best quality, the recording period is the
shortest compared to the other record modes.
MOTION RECORD: Recording will proceed only if a motion is detected.
ALARM RECORD: Recording will proceed only if an alarm event occurs.
buttons or use the mouse to set RECORDING
Figure
5-1).
Advertisement
Table of Contents
