Config Terminal Width; Show Terminal Width - D-Link xStack Reference Manual
Dgs-3620 series layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xStack:
- Reference manual (1109 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To clear the terminal screan:
DGS-3620-28SC:admin#clear
Command: clear
2-26
config terminal width
Description
This command is used to configure the terminal width.
Format
config terminal width [default | <value 80-200>]
Parameters
default - Specifies the default terminal width value.
<value 80-200> - Enter a terminal width value between 80 and 200 characters. The default value
is 80.
Restrictions
None.
Example
To configure the terminal width:
DGS-3620-28SC:admin#config terminal width 90
Command: config terminal width 90
Success.
DGS-3620-28SC:admin#
2-27
show terminal width
Description
This command is used to display the configuration of the current terminal width.
28
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the xStack and is the answer not in the manual?
Questions and answers