Enable Interface - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
disable interface [outband | inband]
outband
inband
Example:
P460-1# disable interface outband
You must reset the device in order for the change to take
effect.

enable interface

User level: read-write, admin.
Use the enable interface command to enable the inband and outband
interfaces.
The syntax for this command is:
enable interface {outband | inband}
outband
inband
Example:
P460-1# enable interface inband
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Attaching network interface lo0... done.
Login:
28
Disables the outband interface
Disables the inband interface
Enables the outband interface
Enables the inband interface
Welcome to P460
SW version 1.0.1
Avaya P460 Reference Guide