Ip Vrrp Timer; Line - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Example:
To set the priority value for virtual router 1 to 10:
Router-1(configure-if:marketing) # ip vrrp 1 priority 10
Done!
Example:
To set the virtual router simple password for virtual router 1 to abcd:
Router-1(configure-if:marketing) # ip vrrp 1 auth-key abcd
Done!

ip vrrp timer

User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID.
Use no ip vrrp timer command to restore the default value.
The syntax for this command is: [no] ip vrrp <vr-id> timer <value>
vr-id
value
Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:
Router-1(configure-if:marketing) # ip vrrp 3 timer 2
Done!

line

You can only access this command from the banner or post-login banner
context.
Use the line command to add a line to the banner or post-login banner message.
58
Virtual Router ID (1-255)
The advertisement transmit time (seconds).
Avaya P460 Reference Guide