Rmon History; Router Ospf - Avaya P460 Reference Manual

rmon history

User level: read-write, admin.
Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval
<interval> buckets <number of buckets> owner <owner name>
history_index
module/port
interval
number of
buckets
owner name
Example:
P460-1# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

router ospf

User level: read-write, admin.
Use the router ospf command to enable the OSPF protocol on the system.
Use the no router ospf command to disable the OSPF one the system.
The default is disabled.
The syntax for this command is:
[no] router ospf
Example:
Router-1 (super) # router ospf
Done!
Avaya P460 Reference Guide
This is the history index number of this entry (it is advisable to
use the same interface number as your history index number).
The switch number/the port number.
The interval between 2 samples.
The number of buckets defined.
The owner name string.
Chapter 2 Avaya P460 CLI Commands
69