Show Time; Show Time Parameters; Show Timezone - Avaya P460 Reference Manual
Multilayer modular switch
Hide thumbs
Also See for P460:
- Installation and maintenance manual (96 pages) ,
- Manager user manual (158 pages)
Table of Contents
Advertisement
Chapter 2
Avaya P460 CLI Commands
show time
User level: read-only, read-write, admin.
Use the show time command to display the current P460 time and timezone.
The syntax for this command is:
show time
Example:
P460-1> show time
10:32:34 27 JAN 2000 GMT
show time parameters
User level: read-only, read-write, admin.
Use the show time parameters command to display the time status and
parameters.
The syntax for this command is:
show time parameters
Example:
P460-1> show time parameters
Client status: Enabled
Current time : L:00:57:19 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server
Time acquired from Time-Server: 0.0.0.0
Time protocol set to
show timezone
User level: read-only, read-write, admin.
Use the show timezone command to display the current P460 time zone.
The syntax for this command is:
show timezone
178
: 0.0.0.0
(I.e. broadcast address)
: TIME protcol
Avaya P460 Reference Guide
Advertisement
Table of Contents
