Troubleshooting authentication
1. Use the ping <server IP> command to ensure connection.
2. Observe no packet loss to confirm connection.
Enable EAP on the PC
The PC must have an EAP-enabled device that is correctly configured.
Task flow: Enable EAP on the PC
The following task flow assists you to ensure the PC network card has EAP enabled.
Figure 28: Enable EAP on the PC
Navigation
Enabling EAP on PC network card
Enabling EAP on PC network card
The PC must have the correct hardware and configuration to support EAP.
60
Troubleshooting
on page 60
November 2010