Hostname (Layer 3); Interface - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Example:
P460-1# hostname
Session hostname is 'P460'
P460-1# hostname "gregory"
P460-1(super)#
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

hostname (Layer 3)

User level: read-write, admin.
Changes the system prompt used for the router. This command does not change the
system prompt of the switch. To change the system prompt of the switch, use the
host name command in the Layer 2 tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string
Example:
Router-1> hostname Marketing
Marketing-1 #
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

interface

User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the interface command to create and enter the Interface Configuration
Mode.
Use the no interface command to delete a specific IP interface.
30
The string to be used as the hostname (up to 20 characters).
If you do not enter a string, the current hostname is
displayed.
Avaya P460 Reference Guide