Avaya P460 Reference Manual page 121

set snmp trap <rcvr_addr> {enable|disable} {all|config|fault|...}
enable
disable
all
config
fault
rcvr_addr
Example:
To enable SNMP ConfigChange traps to a specific manager:
P460-1# set snmp trap 192.168.173.42 enable config
SNMP config change traps enabled.
Example:
To enable all traps to a specific manager:
P460-1# set snmp trap 192.168.173.42 enable all
SNMP all traps enabled.
Example:
To disable SNMP config traps to a specific manager:
P460-1# set snmp trap 192.168.173.42 disable config
SNMP config traps disabled.
Example:
To add an entry in the SNMP trap receiver table with default:
P460-1# set snmp trap 192.168.173.42
SNMP trap receiver added.
Avaya P460 Reference Guide
Activate SNMP traps
Deactivate SNMP traps
(Optional) Specify all trap types
(Optional) Specify the ConfigChange trap from the TRAP-MIB.
(Optional) Specify the Fault trap from the TRAP-MIB.
IP address or IP alias of the system to receive SNMP traps
Chapter 2 Avaya P460 CLI Commands
111