Set Time Client; Set Time Protocol - Avaya P460 Reference Manual

set time client

User level: read-write, admin.
Use the set time client command to enable or disable the periodic network
time acquisition by the switch from the network time server (SNTP or TIME
protocol).
The syntax for this command is:
set time client {enable|disable}
enable
disable
Example:
P460-1# set time client enable
Time client mode enabled

set time protocol

User level: read-write, admin.
Use the set time protocol command to set the protocol for use in the system as
either SNTP protocol or TIME protocol.
The syntax for this command is:
set time protocol
sntp-protocol
time-protocol
Example:
P460-1> set time protocol sntp-protocol
The protocol has been set to SNTP protocol
P460-1>
The protocol has been set to TIME protocol
Avaya P460 Reference Guide
Enable periodic network time acquisition
Disable periodic network time acquisition
[sntp-protocol|time-protocol]
Use the SNTP protocol
Use the TIME protocol
set time protocol time-protocol
Chapter 2 Avaya P460 CLI Commands
115