Set Allowed Managers Ip; Set Arp-Aging-Interval - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

set allowed managers ip

User level: read-write, admin.
Use the set allowed manager ip command to add or remove an IP address
from the Allowed Managers table. The Allowed Managers table can contain up to
twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add | delete][IP address]
add
delete
IP address
Example:
P460-1(super)# set allowed managers ip add 149.49.32.134
Ip was added to the table

set arp-aging-interval

User level: read-write, admin.
Use the set arp-aging interval command to set the ARP table aging interval
for gateways' entries in the agent ARP table.
The MAC value for the default gateway of the agent in the ARP table, is deleted at
the end of every aging interval. The default value is 10 minutes.
The syntax for this command is:
set arp-aging-interval <value>
value
Example:
P460-1# set arp-aging-interval 10
ARP table aging interval for gateways was set to 10
minutes.
72
Add specified IP address to the Allowed Managers
table
Deletes specified IP address from the Allowed
Managers table
IP address to be added or remove
The number representing the interval, from 0-10 minutes.
Avaya P460 Reference Guide