Table of Contents
Advertisement
Chapter 5
CLI – Layer 2
• show ppp baud-rate
• show ppp
configuration
• show tftp upload/
download status
• show tftp download
software status
• show web
aux-files-url
• show intelligent-
multicast
• show intelligent-
multicast hardware
support
• show security mode
• show secure mac port
• show arp-tx-interval
• show arp-aging-
interval
• show self-loop
discovery
• show allowed
managers status
• show allowed
managers table
show time
Use the show time command to display the current stack time.
The syntax for this command is:
show time
Output Example:
P330-N> show time
42
Shows the baud rate.
Displays the ppp configuration.
Shows the status of the TFTP upload/
download configuration per switch.
Shows the status of the TFTP software
download of the Device Manager
software to the switch.
Shows the location (URL/directory) of
the P330 Device Manager Help files.
Shows the status IP multicast filtering
application.
Shows whether the connected unit's
hardware supports IP multicast filtering.
Displays the status of the MAC security
feature (enabled/disabled).
Shows the secure MAC addresses of a
port.
Displays the keep-alive status.
Displays the ARP table aging interval for
gateways' entries.
Displays the self-loop discovery mode.
Displays the status of the allowed
managers feature (enabled/disabled) .
Displays the IP addresses of the allowed
managers.
Page 70
Page 70
Page 71
Page 71
Page 72
Page 72
Page 73
Page 73
Page 74
Page 74
Page 74
Page 75
Page 75
Page 76
Avaya P333T-PWR User's Guide
Advertisement
Table of Contents
