Avaya C360 Installation And Configuration Manual page 78

Establishing Switch Access
Table 16: SNMP CLI Commands 2 of 3
78 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
In order to...
Configure the SNMPv3 engine
ID
Return the SNMPv3 engine ID
to its default value
Create an SNMPv3 user
Remove an SNMPv3 user
Create an SNMPv3 group
Remove an SNMPv3 group
Create a view or add or exclude
OIDs from a view
Delete an SNMPv3 view
Set a read/write/trap SNMPv1
community name
Display a list of SNMPv3 views
Display a table of SNMPv3
users and the groups with which
they are mapped
Display the SNMPv3 engine ID
Display a list of SNMPv3 groups
Display a list of SNMPv3 users
Display a list SNMPv3
notification receivers and
SNMPv1 trap receivers
Enable or disable link up/link
down notifications and traps
Define SNMPv1 trap receivers
or configure the SNMPv1 traps
sent by the device
Removes SNMPv1 trap
receivers
Enable or disable SNMPv1 traps
for authentication failures
Use the following command...
snmp-server engineID
no snmp-server engineID
snmp-server user
no snmp-server user
snmp-server group
no snmp-server group
snmp-server view
no snmp-server view
set snmp community
show snmp view
show snmp userToGroup
show snmp engineID
show snmp group
show snmp user
show snmp
set port trap
set snmp trap
clear snmp trap
set snmp trap enable/disable
auth
2 of 3