Avaya C360 Installation And Configuration Manual page 32

Avaya C360 Front and Rear Panels
Table 3: C360 Function LED Descriptions 2 of 3
LED
Name
The following Function LEDs apply to all ports
LNK
COL
Tx
Rx
FDX
Hspd
LAG
32 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Description LED Status
Port Status OFF - Port is disabled
ON - Link is OK
Blinking - Port is enabled, but Link is down
Collision OFF - No collision or full-duplex port for ports 1 to
24/48; always OFF for ports 51 to 52.
ON - Collision occurred on line.
Transmit to line OFF - No transmit activity
ON - Data transmitted on line from the module
Receive from OFF - No receive activity
line
ON - Data received from the line into the module
Full Duplex OFF - Half duplex mode (ports 1 to 24/48)
mode
ON - Full duplex mode (ports 1 to 24/48)
Always ON for ports 51,52 (full-duplex mode
only)
High Speed
OFF:
ON:
Link OFF - No LAG defined for this port
Aggregation
ON - Port belongs to a LAG
Group
(Trunking)
Ports 1-24/48 Ports 51,52
10 Mbps N/A
100 Mbps 1000 Mbps
2 of 3