Wall Mounting (Optional) - Avaya C360 Installation And Configuration Manual

Installation
- Use four screws to attach each bracket to the switch for non-NEBS switches.
- Use eight screws to attach each bracket to the switch for the C364T NEBS switch.
3. Position the switch in the rack.
4. Fasten the switch in the rack with the screws provided.

Wall Mounting (Optional)

Note:
Do not mount the C364T NEBS on a wall.
Note:
You can fix the C360 to the wall as follows:
!
CAUTION:
Ensure that the wall and screws can support the weight of the C360 and any
CAUTION:
installed modules. The maximum weight of a C360 switch is 15 lb. (6.8 kg)
!
CAUTION:
You must mount the C360 with the ventilation holes facing left and right and the
CAUTION:
front panel facing up.
1. Attach the brackets to the C360 as shown in
either the top or the bottom of the unit, depending whether you want the top panel or bottom
panel of the unit to face the wall.
Figure 12: C360 Wall Mounting
2. Place the unit on the wall.
3. Secure the unit to the wall using two screws on each side. Do not overtighten the screws.
40 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Figure 12.You can attach the brackets to face